Bursting Heads

Utilizing our articulated pipe bursting head design, our heads provide you with the ability to navigate up to three 45 degree bends in a single pull without the oval damage to the PE product pipe.

This design allows the ability to enter the old host pipe neutrally, reducing the wrestling match with the pipe that often comes in tight quarters as well as distortion to the entry hole. It also eliminates the need to have to dig under and push down the newly installed PE pipe before you can make the connection to the existing pipe at the entry pit.

Call for Pricing

Made from high grade tool steel.

All of our bursting heads are heat treated to a very high Rockwell hardness for reduced abrasion, wear, and pulling pressures.

The SR series bursting heads feature a replaceable blade for bursting PVC, cast iron, clay, orange burg, transite, or ABS.

Available Pipe Sizes2″, 3″, 4″, 5″, 6″, 8″

Locking device

The locking device in our bursting heads locks to pure cable, not requiring swaged ends, and allowing us to use welded ends on the cable to prevent unraveling. The locking device can easily be released allowing the cable to be removed from the head by rotating the spur gear counter clockwise.

The product pipe locking device is attached and removed from the bursting head with a clevis pin. Once removed from the head, it can be attached and locked to the new product pipe by turning the eyelet, with no need of cutting the pipe.

Our articulating bursting heads, with quick locking cable system, are years ahead of the competition.

For use with the
R8 Pipe Bursting System

R8

To get current pricing or a custom quote, contact us at sales@roddieunderground.com